450m Truck-mounted Water Drilling Machine (SW-450T)

SW-450T truck mounted drilling rig, it’s main components are installed in the “HOWO” brand 6×6 automotive chassis. The mud direct cycle drilling is as the main way of drilling, equipped with the appropriate device, can realize reverse circulation drilling, DTH hammer drilling. Equipped with decompression device, significantly improving drilling efficiency, drilling rig all adopts full hydraulic control. The product can realize the farmland irrigation, drinking water and industrial water supply.

Truck-mounted Water Drilling Machine Technical Parameters:

Dimension(LxWxH): 11300×2500×4100（MM)			The whole machine weight: 20T
Drilling aperture: 500MM			The drilling depth: 450M
Kelly: 108×108×7500MM			Hole drill pipe : φ89
Drill chassis parts	① Chassis: HOWO of SINOTRUK② driving method: 6×6
The mast section	①Type: Truss type ②Load: 50T ③Height: 15m
Diesel power part	Diesel engine model: WP6D132E 120KW
Mud Pump	Model BW900/25 mud pump maximum pressure 2.5 MPa maximum pump discharge 900 L/min required power 37 Horsepower suction pipe diameter Φ102 MM diameter of the drain pipe Φ76MM
Rotary table gear box	Output speed (r/min) Ⅰ Ⅱ Ⅲ IV V reversal 33 59 97 159 253 27
Main hoist Include bailing, tool winch	①Single rope tension 40000N ②Drum diameter： φ280MM ③wirerope diameter Φ17.5MM④rope capacity 120m
	Bailing	①Single rope tension 40000N ②Drum diameter： φ280MM ③wirerope diameter Φ17.5MM④rope capacity 120m
control panel	All hydraulic operation,source of power for hydraulic pump,convenient and efficient
rotary table	Rotary table through hole diameter (mm) Φ505 Remarks：Speed parameters
rig can be installed 30KW generator	After the installation of generator, can be used as electric welding, lighting, and other useful life.