About Contact |


Integrated Drill Rig ( With Compressor )/DTH Drilling Rig/

SDA-44 Automatic Integrated Air DTH Hammer Rig Built-in Air Compressor

Product: Automatic Integrated DTH Drilling Rig With Built-in Air Compressor
Drilling Depth: 28m
Drilling diameter :90-130mm
Air Compressor: 16m³/min
Power: 191KW Engine
Application: widely used in surface quarry and mining blast hole drilling, pre-splitting hole drilling, buffer hole and slope pressure relief hole drilling, and super deep hole drilling.

We’re here to help,
Easy ways to get the answers you need.

Mobile Phone: 008618137852864

Email: info@www.songtemachine.com

  • Product Details

SDA-44 Automatic Integrated Air DTH Hammer Rig Built-in Air Compressor

Compact size but powerful drilling capability. Applicable in surface quarry mining and varieties of bench blast hole drilling for mid soft and mid hard rocks, meeting production efficiency needs.

Better drilling capabilities, higher quality holes.
Base on mature technology, we constantly improve the drill rig production capabilities and work adaptability. SDA-44 with near perfection on flexibility and reliability for higher production efficiency, better adaptability and higher quality holes.
One machine can do it all to increase stripping speed and control dilution rate. Lighter weight and compact size allows easy moving around between work sites and benches. Because of the excellent flexibility and powerful drilling capabilities, SDA-44 is widely used for various drilling applications, such as surface quarry and mining blast hole drilling, pre-splitting hole drilling, buffer hole and slope pressure relief hole drilling, and super deep hole drilling.

SDA-44 Automatic Integrated Air DTH Hammer Rig Features:
1.Precise straight hole for better blast result control.
2.Increasing stripping speed by combining and pre -splitting holes.
3.Reducing waste by increasing slope angle.
4.Much better flexibility than the traditional drill rigs.
5.Heavy duty motor and chain feed beam, stable and reliable.
6.Box design feed beam, strong and flexible.
7.Rock falling protected FOPS and rollover proof ROPS, all view AC cab with noise and shock proof.
8.All enclosed structural rig, pneumatic spring protection doors for easier maintenance and service.
9.Round table rod ( pipe) change system, excellent for deep hole drilling.
10.3.5″ / 4”hammer rotary head, torque up to 2,800 Nm.
Excellent return on investment
SDA-44 working pressure up to 20 bars with 3.5 m drill pipe and choices of 2 dia. sizes to choose from, good for foot hole drilling and drilling speed much faster than the competitive products.

High efficiency, energy saving, environment friendly,safety
Dual stage air compressor for excellent energy performance ratio and high air pressure drilling. Excellent Fuel economy better for energy saving and environment.
High torque rotary head to conquer jamming in most rock formations.
Two stage dust collection system to meet environment requirement.
All closed AC Cab for better view, comfortable and safe operation.
New style feed beam, excellent for direction control and stability to achieve high precision drilling.

Flexibility and maneuverability
SDA-44 with excellent tramming ability for fast and safe moving between job sites. With adequate ground clearance and 10° oscillation on heavy duty track frame, great off road capabilities due to low gravity and balanced weight distribution. Excellent vertical and various inclined drilling even on slopes.

Convenient maintenance and service access
SDA-44 design in mind with maintenance and service convenience at the beginning. With spacious service room, all maintenance access points easy to reach. Marked and labeled at both ends of hoses & pipes and electrical wires & cables with ring labels for easier service access.

The more vertical of the bench slope the better production economy
Pre-splitting for higher and narrower benches and sharper slope to reduce waste and less excavation, in turn to reduce dilution rate for higher production rate and better profits for the mines.

SDA-44 Integrated Air DTH Hammer Rigs Technical Parameters:

SDA-44 Automatic Integrated DTH Drilling Rig
Recommended Hole size range Boom Type Heavy duty straight
Hole size range Ø90 -130 mm Feed Beam
Hammer Sizes 3.5 inches / 4 inches Feed Driving Type Motor – Chain
Drill Rod ( Pipe ) Handling system ( RHS ) Total Length 6,865 mm
Pipe Handling System 7+1 Feed travel length 4,100 mm
Drill Pipe dia 68 mm / 76 mm Feed extension 1,200 mm
Drill Pipe Length 3.5 m Max. Feed speed 0.85 m/s
Max. Hole Depth w/ auto RHS 28 m Max. Feed force 15 kN
Hydraulic Rotary Head Max. Pull up force 31 kN
Rotation Speed 0-105 rpm Chassis
Max. Work Torque 2800 Nm Max. tramming speed 3 km/h
Engine Max. Traction force 115.4 kN
Engine Model YC6A260L-T20 Slope Capability 30º ( add winch if >20º )
Rated Power 191 kW @ 2,000 rpm Track Frame Oscillation ± 10°
Emission Standard Tire 2 Ground Clearance 450 mm
Fuel Tank Transportation Dimensions ( w/o options ) about
Size 350 L Weight 15,000 kg
Compressor JE810 II Width 2,480 mm
Max. Work Pressure 20 Bar Length 9,980 mm

16 m³/min Height 3,200 mm

Automatic Integrated Air DTH Blasting Drilling Rigs Delivery:

Your Name
Your Email
Your Phone Number
Please include your detailed requirements, so that we can quote the best price accordingly.