SP-8ACablePercussionDrillingRigForLargeBoreholes300m-SongteTheleaderofone-stopdrillingrigmanufacturer

Percussion Drilling Rig/

SP-8A Cable Percussion Drilling Rig For Large Boreholes 300m

Product: Cable Percussion Drilling Rig
Drilling Depth: 200m/300m

Drilling Diameter: 300~1800mm
Application: mainly used in big diameter water well drilling, agricultural irrigation well drilling, deep foundation engineering construction of large caliber cast-in place pile and construction of diaphragm wall and deep water well.

We’re here to help,
Easy ways to get the answers you need.

Mobile Phone: 008618137852864

Email: info@songtemachine.com

  • Product Details

SP-8A Cable Percussion Drilling Rig For Large Boreholes

SP-8A Large Diameter Cable Percussion Drilling Rig Feature and Application:

A. Percussion drilling rig is mainly used in deep foundation engineering (tall building engineering, water conservancy project, bridge construction) construction of large caliber cast-in place pile and construction of diaphragm wall and deep water well.

B. The impact hammer of Percussion drilling rig can break rock into pieces and then use the slag exhausting equipment to clean the slag out of the hole. The drill bit is a heavy hammer can drive the soil, sand, pebble and etc into around of the hole, no need to exhaust them out of the holes. Meanwhile, the formed hole wall is high dense and strong and improving the carrying capacity of the pile foundation.
C. Percussion drilling rig is very popular in the market currently, all of its components are all installed in the trailer, like electric motor, hoist, mast etc, integrate motion. The percussion drilling rig uses the crank-link mechanism to change the power’s gyration motion into alternating motion, through the steel cable to drive the drill bit to do up-and-down motion.

SP-8A percussion drilling rig is one of the most important drilling machine in the piling foundation and bore hole drilling. It can adapt various geological condition, especially for drilling hole in gravel and rock with strong adaptation. Meantime, percussion drilling rig has high pore forming efficiency and good pile formation quality.

SP-8A drilling rig is very popular in the market currently, all of its components are all installed in the trailer, like electric motor, drive motor, hoist, mast, etc, integrate motion. The percussion drilling rig uses the crank-link mechanism to change the power’s gyration motion into alternating motion, through the steel wire rope to drive the hammer bit to do up-and-down motion. With the impact effect of the hammer bit’s free failing, to break the soil, sand, gravel or rock into pieces, and then use the slag tube or mud pump to clean the slag our of the hole.

Tubular bit has all kinds of diameters, the hole decides the size and weight of the bit. This tubular bit is very efficient in drilling soil, sand, gravel and rock layer whose hardness is less than 1000kp.

Solid bit has various shapes, but most of the shapes are”+” or “-” types. There are all kinds of sizes, the diameter of the hole decides the size and weight of the bit. This solid type bit is hard to break in drilling rock layer whose hardness is more than 1000kp.

The drilling way of percussion rig is to break the rocks into granular slag, though it is not as efficient as core drilling rig or screw drilling rig, but it is irreplaceable, for it can operate in the geological layer when other drilling rigs can not. In short, there is no layers that this kind of drilling rig can not drill, the drill speed depends on the hardness of the working stratums.

SP-8A Cable Percussion Drilling Rig Technical Parameter:

No

Description

Specification

1

Overall dimension (L*W*H)

Operating mode

9.30mx2.50mx3.10m

Pulling mode

9.30mx2.28mx2.80m

2

Gross weight

9500 kg

3

Bore hole diameter

Φ300mm-Φ1800mm

4

Drilling depth

200m(with hole dia. 600mm)

300m (with hole dia. 500mm)

5

Max. weight of drilling tools

5000 kg

6

Impact stroke

min 700mm, max 800mm

7

Impact frequency

38-42/min

8

Electric motor

Model:YL280M2-6

55kw, 980r/min

9

Mast height

Single pole:8.5-9.5m;

10

Mast load capacity

50,000 kg

11

Hauling speed in highway

30 km/h

12

Hoist lifting capacity

Pre-hoist

20,096 N

Post hoist

68,357 N

13

Winding drum rope specification and capacity

Pre-winding drum

6x19s+IWRC 200-300m (levorotation)

Post-winding drum

6×37-φ18 200-250m (levorotation)

14

Wheel

Wheel size

7.50-20

Steel ring size

20×7

Cable Percussion Drilling Rig For Well Construction Worksite:

Your Name
Your Email
Your Phone Number
Please include your detailed requirements, so that we can quote the best price accordingly.

Prev: