About Contact |

BiomassPelletMakingMachineBiomassPelletMachine-SongteTheleaderofone-stopdrillingrigmanufacturer

Associated Equipment/

Biomass Pellet Making Machine Biomass Pellet Machine

Product: Biomass Pellet Making Machine
Materials could be pressed: various wood waste like wood chips, branches, trunks and bark, various crop straws, rice husk, sunflower seed husk, peanut shell and other melon and fruit shells, rubber, cement, ash and other chemical raw materials.

We’re here to help,
Easy ways to get the answers you need.
Mobile Phone: 008618137852864
Email: info@www.songtemachine.com

  • Product Details

Biomass Pellet Making Machine Biomass Pellet Machine

Biomass pellets are a new type of bioenergy, mainly used for civil heating and domestic energy, with high combustion efficiency and convenient storage. As the main fuel for industrial boilers, it can replace coal to reduce atmospheric emissions and pollution. It can also be used as fuel for thermal power generation. It can replace wood, raw coal, fuel oil, liquefied gas, etc.

Our biomass pellet making machine is suitable for pressing various materials, such as: various wood waste like wood chips, branches, trunks and bark, various crop straws, rice husk, sunflower seed husk, peanut shell and other melon and fruit shells, rubber, cement, ash and other chemical raw materials.

Biomass pellet making machine is a kind of biomass energy pretreatment equipment. It mainly uses agricultural and forestry processing waste such as wood chips, straw, rice husk, bark and other biomass as raw materials, and solidifies it into high-density pellet fuel through pretreatment and processing. With my country’s comprehensive management of energy and the environment, biomass pellet machines have been vigorously promoted, which use crops such as corn stalks, wheat straw, straw, peanut shells, corncobs, cotton stalks, soybean stalks, weeds, branches, leaves, sawdust Solid wastes such as bark and bark are used as raw materials, which are pulverized, pressurized, densified, and shaped by a biomass pellet machine to become small rod-shaped solid biomass pellet fuels. The density of raw materials is generally about 0.6-0.8, and the particle density after molding is greater than 1.1. It is convenient for transportation and storage. At the same time, its combustion performance is greatly improved, reducing human dependence on fossil energy and atmospheric emissions.

Biomass pellet making machine adopts the interaction principle of the extrusion force between the ring die and the pressure wheel and the friction force of the die hole to shape the material. There is no need to add any additives and binders during the processing of materials. Wooden materials have softening characteristics. When the temperature reaches a certain value, they will soften and the bonding strength will increase. Under pressure, the fiber molecular groups will be dislocated, deformed, extended, and the internal Adjacent biomass particles are recombined and pressed into shape. Biomass pellet making machine mold vertical, vertical feeding, mold static, pressure wheel rotation, material centrifugal, uniform distribution, 360-degree discharge, good energy-saving effect, automatic lubrication system, high-pressure filtration, clean and smooth, independent frequency conversion, to ensure particle formation .

Advantages of Biomass Pellet Making Machine:

  1. Vertical feeding, directly in place.
  2. The mold is stationary, the pressure wheel rotates, the material is centrifugal, and evenly distributed around.
  3. Two-layer mold, dual-purpose up and down, cost reduction and efficiency increase; dual-purpose, high-yield and energy-saving.
  4. Ring mold, vertical structure, good for heat dissipation and cooling in the granulation chamber.
  5. Independent discharge device to ensure the molding rate of pellets.
  6. Independent lubrication system, which can realize automatic lubrication without stopping the machine.

Biomass Pellet Making Machine Technical Parameters:

Model SPM160 SPM132 SPM110 SPM90 SPM55
Power (kw) Host 160 132 110 90 55
Feeder 2.2 1.5 Spindle drive
Electric oil pump 0.37+0.65 0.37
Ring die inner diameter (mm) 700 600 600 560 450
Capacity (t/h) 2.5-3 2-2.5 1.8-2 1.2-1.5 0.8-1
Rotating speed (r/min) 1450
Voltage (v) 380,3phase,50hz, can be customized as your country.
Pellet size (mm) 4-12
Granulation temperature(℃) 40-80
Original moisture (%) 15-25
Machine weight ( t ) 8 7 6.5 5.6 2.9
Machines dimension (mm) 2460*1400*2000 2200*1200*1750 3100*1300*2100 2300*1250*2000 2160*1000*1850

Biomass Pellet Making Machine Application:

Your Name
Your Email
Your Phone Number
Please include your detailed requirements, so that we can quote the best price accordingly.

Prev:

Next: